NEW WAREHOUSE INVENTORY
| Qty. |
Description |
| 1 |
WOONSOCKET Napper, Single Acting, 108", 20 Rolls,
Stainless Steel Slat Expander (I#1880) |
| 1 |
OMERT
Washing/Bulking/Fulling Machine, w/Auto Controls, 4-Strand, S.S., M/N
DC-12, 500 Lb. Capacity (I#1923) |
| 1 |
MASCOE System 4 Coater, 102" Maximun
Working Width, 74" Table, w/54-1/2" Trough (I#1925) |
| 1 |
ALEXCO 2-Roll Batcher,
84", Pneumatic Guiding w/Pneumatic Cylinder and Roll Kick-Out,
Yardage Counter (I#1926) |
| 1 |
BOND 2-Roll Batcher, 84", w/Pneumatic
Edge Guiding and Yardage Counter (I#1927) |
| 1 |
Tubular Inspection
Machine, 48" Width, w/Cradle, Lighted Inspection Board and Swing
Folder (I#1930) |
| 1 |
Tubular Inspection Machine, 48" Width,
w/Cradle, Lighted Inspection Board and Swing Folder, Single Roll
Take-up, Reliance Electric Speed Control (I#1931) |
| 1 |
Tubular Inspection
Machine, 48" Width, w/Cradle, Lighted Inspection Board and Swing
Folder, Single Roll Take-up, Reliance Electric Speed Control (I#1932) |
| 1 |
Tubular Inspection Machine, 48" Width,
w/Cradle, Lighted Inspection Board and Swing Folder, Single Roll
Take-up, Reliance Electric Speed Control (I#1933) |
| 1 |
Tubular Inspection
Machine, 48", Cradle Let-off, Single Roll Take-up, Horizontal
Lighted Board, Yardage Counter (I#1935) |
| 1 |
Tubular Inspection Machine, 48",
Cradle Let-off, Single Roll Take-up, Horizontal Lighted Board, Yardage
Counter (I#1935) |
| 1 |
Despatch Oven:
Inside Diameter 30" W x 18" D x 24" H, 200 Deg. C Max.
Temperature, Model LEB-1-75, Ma. Temperature 400 Deg. F, 120/240 Volts,
Meter Power 2700 Watts, S/N 83342 (I#1936) |
| 1 |
Lafer Shear (I#1938) |
| 1 |
Scholl Dye Machine, Year
1994, S/N SF202/HE-575 - M/N 93537-CRN-C9109.6, 900 Lb Capacity, 1-Port,
3-Strand Atmospheric Dye Machine w/Add Tank and Beacon 141 Controller
(I#1941) |
| 1 |
PARKS & WOOLSON Machine Co. Shear
Range, Consisting of (2) P&W Shears, 84" W, w/Cloth Guiding,
Back Brush, Bow Roll, Seam Jumper, Auto Lubrication, Flat Folder at
Exit, DC Drive Panel, Spare Fly Blades & Ledger Blade (I#1942) |
| 1 |
STAUBLI Jacquard, Type
CX860, MC# 777.050.01, Year 1992, 1342 Hooks, w/Controller and Drive
Shaft (I#1943) |
| 1 |
GARDNER DENVER Electra Saver II Air
Compressor, S/N M19593, Maximum Pressure 110, Voltage 115, Control
#W/D201ECM544, 1986, Model ECMSLB, Operating Pressure: Minimum 65
- Maximum 110, RPM 1780, 200/400 V, 75 HP (I#1944) |
| 1 |
INGERSOLL RAND Air
Compressor, Model SSR-EPE50, 208CFM, 125 psig, 60 HP, 575 V, 65 amps,
Control Voltage 120, Year 1998 (I#1945) |
| 1 |
TROY Extractor, 40" Diameter,
Stainless Steel Basket (non-removable), 3 HP, 480 V (I#1946) |
| 1 |
Floor Scraper (I#1947) |
| 1 |
MACBETH Spectralight, Model SPL75B, S/N
50309, 120V, 200 Watts, 4 Functions: DAY, HOR, CWF & UV
(I#1948) |
| 1 |
MENZEL Portable Hydraulic
Machine, Type SPB, S/N 01058, 3 HP, 230/460 Volts (I#1949) |
| 1 |
MENZEL Portable Hydraulic Machine, Type SPB,
S/N 01068, 3 HP, 230/460 Volts (I#1949) |
| 1 |
SCOTT Tester, Model DH,
1" Jaws Top and Bottom, S/N 44460 (I#1952) |
| 1 |
MENZEL A-Frame Batcher, Type 91SB, 90"
Face Width, 7.5 HP, 230/460 Volts, S/N 0279 (I#1951) |
| 1 |
TWIN CITY FAN & MOTOR
CO. Blower, Size 917, Type RBW-SW, Class 22, 25 HP, 230/460 Volts,
17" Inlet, 14" x 16" Outlet (I#1953) |
| 1 |
TWIN CITY FAN & MOTOR CO. Blower, Size
917, Type RBW-SW, Class 22, 25 HP, 230/460 Volts, 17" Inlet,
14" x 16" Outlet (I#1954) |
| 1 |
MAHLO Weft Straightener
(2 Pieces), Type FMC-74-N, S/N 1900/2149/3403, w/Orthomat FM7 Controls,
80" Face Width, 4 Optics, Year 1984 (I#1955) |
| 18 |
Stainless Steel Buggies (I#1956) |
| 1 |
AVL Hand Loom, 38"
Width, 16 Harnesses, w/AVL Computer, S/N 01144 (I#1959) |
| 1 |
MENZEL A-Frame Batcher, Type 91SB, 90"
Face Width, 7.5 HP, 575 Volts, S/N 314 (I#1960) |
| 1 |
Stainless Steel Tank, 6'
x 84" (I#1961) |
| 1 |
TITAN Warp Tying-In Machine with Stand,
220cm Wide, Type G00 04612 (I#1963) |
| 1 |
TITAN Warp Tying-In
Machine with Draw-in Stand, 220cm Wide, Type GK6BH, S/N 3287 (I#1964) |
| 1 |
TITAN Warp Tying-In Machine With Stand,
220cm Wide, Type TM1, S/N 1603 (I#1965) |
| 1 |
STAUBLI Pattern Card
Punching Machine, S/N 681-23286 (I#1966) |
| 1 |
STAUBLI Pattern Card Punching Machine, S/N
727.950-1 (I#1967) |
| 1 |
Steel Tank, 1000 Gallon
(I#1968) |
|
|
| 1 |
GESSNER
Napper, Knit Goods, 90",
24 Rolls, Serial Number, NH 613, Hydraulic, 440 Volts (*#1881) |
| 1 |
GESSNER Napper, Knit Goods, 90",
24 Rolls, Serial Number, NH 549, Hydraulic, 440 Volts (I#1882) |
| 1 |
GESSNER Shear, 90", Serial
Number SR164\3, 440 Volts (I#1883) |
| 1 |
MORTAMET
Shear, 71", Serial Number 86094886,
Stainless Steel Slat, Type 210341, 440 Volts (I#1884) |
| 1 |
PERKINS
Calender, 71", 3 Rolls,
Schriner/Husk/Steel, 80-Ton Hydraulic Pressure, (2) Spare Husk Rolls, 50
HP DC Drive Motor, S/N H6875-12-63 (I#1885) |
| 1 |
BRAUN Dyeing/Extracting Machines, Type 600NTDPV-3-CC,
600 Pound Capacity, Stainless Steel Processing Compartments,
Self-leveling, Micro Processor Controlled, Year 1999 |
| 1 |
BRAUN Dyeing/Extracting Machine, Type
600NTDPV-3-CC, 600 Pound Capacity, Stainless Steel Processing
Compartments, Self-leveling, Micro Processor Controlled, Year 1999 |
| 1 |
MAYER Sliver Knitting Machine, Type HP 12/SM, 12 Feed,
24", 14 Cut Tape Feeds, Uniwave Oilers, S/N H294 (I#1897) |
| 1 |
MAYER Sliver Knitting Machine, Type
HP 12 SM, 12 Feed, 24", 14 Cut Tape Feeds, Uniwave Oilers, S/N H307
(I#1898) |
| 1 |
MASCO
Coater, 80", Type System 4 (I#1814) |
| 1 |
KUSTER Coater Applicator, 86" to
Coat Both Front & Back of Fabrics, Type 271, 49-1800, 1983,
Fabrication #10564212-01, 80" (I#1796) |
| 1 |
LESSCO On-Frame Coating Head
w/Moveable Track for Foam Coatings: 3 Coating Widths: 60" -
54" - 61", 480V (I#1813) |
| 1 |
PERNICK Inspection
Machine, 72"
Lighted Board, 2-Roll Take-up, Guider, Type PHOTO-TROL MARK IV (I#1754) |
| 1 |
ALEXCO Inspection
Machine, 80", w/Lighted Board, Driven A-Frame Let-off, Compensator,
Operators Platform, 2-Roll Surface Batcher w/Guider, 230/460V (I#1831) |
| 1 |
THEN Airflow AF Jet Dyeing Machine, Model
180, 1 Port w/Filter, Pump & Air Blower, 500 Pound Capacity (I#1845) |
| 1 |
THEN Airflow AF Jet
Dyeing Machine, Model 180, 1 Port w/Filter, Pump & Air Blower, 500
Pound Capacity (I#1846) |
| 1 |
GOLLER Dye
Jig, Enclosed, 70" Roll
Face, S/S Enclosure, Hydraulic Driven, Type 8657, Year 1986 (I#1836) |
| 1 |
MCS Hydraulic Jigger, 80", Type MAXI,
(40" Diameter), S/N 2174, JTRONIX Controller, 1989 (Racks
Warehouse) (I#1893 |
| 1 |
BENNINGER Jigger,
74-1/2" Face Width, Enclosed, S/N 7754 (I#1894) |
| 1 |
BENNINGER Jigger, 74-1/2" Face Width,
Enclosed, S/N 7661 (I#1895) |
| 1 |
GASTON County Jet, 2
Port, Aqualuft/Aquavel 830, S/N AV840171, National Board #16839, 1984
(I#1899) |
| 1 |
GASTON County Jet, 1 Port, Aqualuft/Aquavel,
National Board #16793, S/N AV840121 (I#1900) |
| 1 |
GASTON County Jet, 3
Port, Aqualuft, National Board #15073, S/N A800618, 1980 (I#1901) |
| 36 |
"A" Frames, 84" X 8"
Barrel, 2 Casters, Brake Drum (I|#1902) |
| 1 |
Inspection Unit, 48"
Width, with Dart Variable Speed Drive, Backlight & Folder (I#1930) |
| 1 |
Tubular Inspection
Unit, 48" Width, with Dart Variable Speed Drive and Meter (I#1931) |
| 1 |
Tubular Inspection Unit,
48" Width, with Dart Variable Speed Drive and Length Meter (No
Reverse) (I#1932) |
| 1 |
Tubular Inspection
Unit, 48" W, with Dart Variable Speed Drive and Length Meter
(Forward and Reverse) (I#1933) |
| 1 |
Tubular Inspection Unit,
48" Width, with Dart Variable Speed Drive and length Meter (No
Reverse) (I#1934) |
| 1 |
Tubular Inspection
Unit, 48" Width, with Dart Variable Speed Drive and Length Meter
(Forward and Reverse) (I#1935) |
| 1 |
Despatch Oven, 30" W
x 24" H x 18" D, I.D., 500 Degree F., Maximum Temp (I#1937) |
| 1 |
Birch Brothers 206-62
- S/N 34387 - Mini-Pad with 18" W Rollers & Reeves, Variable
Speed Drive & Portable Stand (I#1937) |
| 1 |
Lafer CM1-1 Shear (I#
1938) |
| 1 |
Scholle Dye Machine,
1994, S/N SF202/HE-575 - M/N 93537-CRN-C9109.6, 900 Lb. Capacity, 1-Port
3-Strand, Atmospheric Dye Machine w/Add Tank |
| |
|
Click Here to
Contact Us: |
